Oil Filter Relocation Block.

General Chat About Engine Build

Moderator: phpBB2 - Administrators

Post Reply
Burbling
Forum Contributor
Forum Contributor
Posts: 29
Joined: Sat Mar 07, 2015 3:04 pm
Location: Wiltshire

Oil Filter Relocation Block.

Post by Burbling »

Hi Guys,

Can anyone give me a spot of advice please?

I am fitting a 3.5 Rover V8 into a Series Land Rover and need to relocate the oil filter as with the standard fit the filter can hit the framework on early landies. My two options look to be fit a remote filter, or find a block that fits the oil filter pointing away from the bodywork.

The people I got the conversion kit offer a block but I can't find any information - I'd prefer to use this than a remote filter system.

Does anyone have rat I need to sell, or know where these can be sourced?

Thanks

Dave Wright



User avatar
Ian Anderson
Forum Contributor
Forum Contributor
Posts: 2396
Joined: Sun Nov 19, 2006 9:46 pm
Location: Edinburgh

Re: Oil Filter Relocation Block.

Post by Ian Anderson »

Try Think Automotive
https://www.thinkauto.com/acatalog/Filt ... nents.html

They were very helpful and knowledgeable.


Ian
Owner of an "On the Road" GT40 Replica by DAX powered by 3.9Hotwre Efi, worked over by DJ Motors. EFi Working but still does some kangaroo at low revs (Damn the speed limits) In to paint shop 18/03/08.

Burbling
Forum Contributor
Forum Contributor
Posts: 29
Joined: Sat Mar 07, 2015 3:04 pm
Location: Wiltshire

Re: Oil Filter Relocation Block.

Post by Burbling »

Thanks - will do mate.

Post Reply

Return to “Engines Area”