Rotor arm and advance.

General Chat About Electrics, And Ignition Systems.

Moderator: phpBB2 - Administrators

Post Reply
Grck1
Newbie
Newbie
Posts: 1
Joined: Wed Aug 04, 2021 7:37 pm

Rotor arm and advance.

Post by Grck1 »

Hi new to the forum

Have a question regarding rotor arm .

Have a range rover classic 3.9 manual. Recently found the vac advance wasn't working so set about fixing it. Unfortunately I made a school boy error in pulling the rotor arm too hard to the extent it dislodged the springs for the advance weights. Stripped down and reattached. Thought all was well but now not sure. Might be in my mind but it feels a little flat power wise.
How much should the rotor arm rotate when turned by hand.?
Thanks geoff



Post Reply

Return to “Electrical & Ignition Area”