Alternator pulley sizes
Posted: Sun Jun 28, 2020 5:38 pm
Hello all,
For my London taxi V8 project, we are going to drive the alternator from the crankshaft pulley. It’s a Lucas a127 alternator I believe and it has a 10mm V belt pulley, about 65mm in diameter with a 15mm bore. As the crankshaft and water pump pulleys take 13mm belts, I thought it would be a simple case of looking online for a 13mm pulley to go on the alternator but after a day of looking, I can’t seem to find any that are suitable this side of the Atlantic.
Does anyone know where I might be able to get hold of a pulley that can take a 13mm wide belt with a 15mm bore?
The only ones I’ve seen have large bosses on that would make it stick too far out.
Many thanks in advance...
For my London taxi V8 project, we are going to drive the alternator from the crankshaft pulley. It’s a Lucas a127 alternator I believe and it has a 10mm V belt pulley, about 65mm in diameter with a 15mm bore. As the crankshaft and water pump pulleys take 13mm belts, I thought it would be a simple case of looking online for a 13mm pulley to go on the alternator but after a day of looking, I can’t seem to find any that are suitable this side of the Atlantic.
Does anyone know where I might be able to get hold of a pulley that can take a 13mm wide belt with a 15mm bore?
The only ones I’ve seen have large bosses on that would make it stick too far out.
Many thanks in advance...