Megajolt map on a superchargd engine
Posted: Thu Jun 15, 2017 6:31 pm
I have converted my 3.5 rover v8 with a eaton supercharger.
So now i need a new iginition map for my megajolt systeem.
Has got anyone a map 4 this kind of set up ?
I know i have to tel megajolt i wil be going from vacuum to pressure inlet manifold.
With the megajolt ecu disconnected it sets its self back to 10 dege fixed, however the engine revs tot almost max and dan stall, without touching the gass. On a normal engine i would say vacuum leak
I am running only on lpg, i have a simple mixer and a pressure compensated omvl vaporiser.
So now i need a new iginition map for my megajolt systeem.
Has got anyone a map 4 this kind of set up ?
I know i have to tel megajolt i wil be going from vacuum to pressure inlet manifold.
With the megajolt ecu disconnected it sets its self back to 10 dege fixed, however the engine revs tot almost max and dan stall, without touching the gass. On a normal engine i would say vacuum leak
I am running only on lpg, i have a simple mixer and a pressure compensated omvl vaporiser.