The V8 Owners Forum -

i have noticed in the past some of the connectors on the wiring loom to fit on the injectors have been changed .i am trying to find out if the wiring is correct way round into the connector . so as i am looking from the drivers side under the bonnet at no 2 injector i have the live wire from the resistor pack going on the left hand side of the injector connector .would this be correct .or does it not matter .any help thanks steve

Doesn't matter. Injectors on the flapper injection aren't polarity sensitive.

But if you're OCD like me you'd insist on them all being the same.

thanks for the reply