injector wiring

General Chat About Electrics, And Ignition Systems.

Moderator: phpBB2 - Administrators

Post Reply
833steven
Newbie
Newbie
Posts: 2
Joined: Tue Mar 07, 2017 10:39 am
Location: devon

injector wiring

Post by 833steven »

i have noticed in the past some of the connectors on the wiring loom to fit on the injectors have been changed .i am trying to find out if the wiring is correct way round into the connector . so as i am looking from the drivers side under the bonnet at no 2 injector i have the live wire from the resistor pack going on the left hand side of the injector connector .would this be correct .or does it not matter .any help thanks steve



DaveEFI
Gold Member
Gold Member
Posts: 4603
Joined: Fri Feb 26, 2010 4:27 pm
Location: SW London, UK

Post by DaveEFI »

Doesn't matter. Injectors on the flapper injection aren't polarity sensitive.

But if you're OCD like me you'd insist on them all being the same. :D
Dave
London SW
Rover SD1 VDP EFI
MegaSquirt2 V3
EDIS8
Tech Edge 2Y

833steven
Newbie
Newbie
Posts: 2
Joined: Tue Mar 07, 2017 10:39 am
Location: devon

Post by 833steven »

thanks for the reply

Post Reply

Return to “Electrical & Ignition Area”