magnecor or formula power

General Chat About Electrics, And Ignition Systems.

Moderator: phpBB2 - Administrators

Post Reply
fenton
Newbie
Newbie
Posts: 20
Joined: Wed Feb 12, 2014 10:04 pm
Location: somerset

magnecor or formula power

Post by fenton »

Need to replace some leads
Magnecor 8mm on offer at the mo from RPI just over £100
Formula Power £80.
Anyone had experience with formula power.



DaveEFI
Gold Member
Gold Member
Posts: 4603
Joined: Fri Feb 26, 2010 4:27 pm
Location: SW London, UK

Post by DaveEFI »

I'd go for Bosch at half the price.
Dave
London SW
Rover SD1 VDP EFI
MegaSquirt2 V3
EDIS8
Tech Edge 2Y

fenton
Newbie
Newbie
Posts: 20
Joined: Wed Feb 12, 2014 10:04 pm
Location: somerset

Post by fenton »

Mmmmm I thought about the bosch leads.
Bought lucas a year ago and failed already. Don't want to be buying another set next year.

User avatar
richardpope50
Gold Member
Gold Member
Posts: 616
Joined: Thu Jan 28, 2010 12:25 pm
Location: Horsham, West Sussex

Post by richardpope50 »

Powerspark had the best spec for the price - http://www.simonbbc.com/ - and got a good rating when I asked on this Forum
Richard.
Dax Rush 5.0l TVR V8, EFI with Megasquirt ECU and wasted spark, Racelogic Traction Control and Quaife LSD ....... Now nut and bolt restoring a TR6

DaveEFI
Gold Member
Gold Member
Posts: 4603
Joined: Fri Feb 26, 2010 4:27 pm
Location: SW London, UK

Post by DaveEFI »

fenton wrote:Mmmmm I thought about the bosch leads.
Bought lucas a year ago and failed already. Don't want to be buying another set next year.
Lucas these days is cheap Chinese stuff. Genuine Lucas would be so old as not to use the latest technology. They would likely still be carbon string.

Bosch are one of the largest car electrics makers. Their leads (ones I bought from Halfords) are conductive plastic. I used them for many years before changing to EDIS.

The cost of 'posh' plug leads is a con. They don't even use copper - which is the expensive part of any normal cable. I'd estimate the true cost of Magnicore cable at about 50p a metre for say 50 metres. Much less in bigger quantities. So like many of these things you're paying through the nose for a name.

Rant over. :)
Dave
London SW
Rover SD1 VDP EFI
MegaSquirt2 V3
EDIS8
Tech Edge 2Y

mgbv8
Forum Contributor
Forum Contributor
Posts: 5326
Joined: Sat Nov 18, 2006 7:57 pm

Post by mgbv8 »

richardpope50 wrote:Powerspark had the best spec for the price - http://www.simonbbc.com/ - and got a good rating when I asked on this Forum
:whs

We use them on both race cars and they seem fine. Been on just over a year now.

Perry

Perry Stephenson

MGB GT + Rover V8

9.62 @ 137.37mph

Now looking for 8 seconds with a SBC engine

http://www.youtube.com/watch?v=nVscbPHgue0&list=UUqIlXfSAoiZ--GyG4tfRrjw



https://www.youtube.com/watch?v=eg3avnsNKrc&index=2&list=FLqIlXfSAoiZ--GyG4tfRrjw

User avatar
SimpleSimon
Knows His Stuff
Knows His Stuff
Posts: 620
Joined: Mon Apr 25, 2011 10:36 pm
Location: East Sussex

Post by SimpleSimon »

mgbv8 wrote:
richardpope50 wrote:Powerspark had the best spec for the price - http://www.simonbbc.com/ - and got a good rating when I asked on this Forum
:whs

We use them on both race cars and they seem fine. Been on just over a year now.

Perry
Yep 8-)
TVR Chimaera RV8 Mods & Megasquirt

Post Reply

Return to “Electrical & Ignition Area”