35dm8 distributor parts

General Chat About Electrics, And Ignition Systems.

Moderator: phpBB2 - Administrators

Post Reply
paul c
Getting There
Getting There
Posts: 214
Joined: Tue Mar 11, 2008 7:41 am
Location: Takaka New Zealand

35dm8 distributor parts

Post by paul c »

I have stripped and cleaned my distributor for my rebuilt engine but have noticed the felts under the base plate are all hard, and one has disappeared. Does anyone know where they may be available from, otherwise I guess I will have to try and make some. Other than that everything seems to be in good condition, no noticeable play.



DaveEFI
Gold Member
Gold Member
Posts: 4512
Joined: Fri Feb 26, 2010 4:27 pm
Location: SW London, UK

Re: 35dm8 distributor parts

Post by DaveEFI »

I'd try Distributor Doctor. Although must admit to not knowing which parts you mean.
Dave
London SW
Rover SD1 VDP EFI
MegaSquirt2 V3
EDIS8
Tech Edge 2Y

paul c
Getting There
Getting There
Posts: 214
Joined: Tue Mar 11, 2008 7:41 am
Location: Takaka New Zealand

Re: 35dm8 distributor parts

Post by paul c »

Thanks will give them a try.
When you remove the shaft there is a thrust washer under the baseplate and the top Bush. The Bush has 5 felt pieces around it, tucked into pockets in the housing. I will try to get a photo later on.

paul c
Getting There
Getting There
Posts: 214
Joined: Tue Mar 11, 2008 7:41 am
Location: Takaka New Zealand

Re: 35dm8 distributor parts

Post by paul c »

Felts arrived from distributor doctor today
Attachments
20210906_185710.jpg

Post Reply

Return to “Electrical & Ignition Area”