Lt77 mounts

General Chat About Drivetrain & Transmission.

Moderator: phpBB2 - Administrators

Post Reply
paulmanta
Helpful or Confused
Helpful or Confused
Posts: 72
Joined: Tue Nov 21, 2006 9:07 pm

Lt77 mounts

Post by paulmanta »

I am putting an LT77 in my Manta (i took out a big jag auto box)
I have it all fitted but need to find a couple of rubber mounts for the rear of the box, the ones i had have gone missing and the muppets at the local motorfactors have no idea what i am on about, it confuses them when you cannot give a chassis number.
The ones i want are the round ones that live at a 45degree angle on the rear of the box, there are two and they screw into the box and then the cross beam bolts to them.

Can i use p6 engine mounts or are they too big?

anyone know a supplier ?

i tried ebay but the few bits listed seem wrong, too big.



ramon alban
Knows His Stuff
Knows His Stuff
Posts: 667
Joined: Fri Nov 17, 2006 11:22 pm
Location: Bedford UK
Contact:

Post by ramon alban »

Hello Paul,

CRC454A is probably what you need?

http://www.rimmerbros.co.uk/rimmer/rover/sd1/mountings

Image

paulmanta
Helpful or Confused
Helpful or Confused
Posts: 72
Joined: Tue Nov 21, 2006 9:07 pm

Post by paulmanta »

Looks like the ones !

Has anyone got a gearbox mount cross beam like that spare ? that would save me loads of time making one.

Post Reply

Return to “Drivetrain & Transmission Area”