Search found 53 matches
- Fri Aug 10, 2007 7:21 pm
- Forum: Electrical & Ignition Area
- Topic: Best Spark plugs to use, and gap :
- Replies: 8
- Views: 2934
Thanks for the info on the Iridium plugs, I am using a full MSD system so will not be putting them in the engine now. Reading the MSD tech site is interesting, The techs seem to be on the ball with most stuff including a guy who is doing a cut and shut to shorten his dizzy, interesting reading if yo...
- Tue Aug 07, 2007 10:40 pm
- Forum: Electrical & Ignition Area
- Topic: Best Spark plugs to use, and gap :
- Replies: 8
- Views: 2934
- Mon Aug 06, 2007 5:59 pm
- Forum: Electrical & Ignition Area
- Topic: Best Spark plugs to use, and gap :
- Replies: 8
- Views: 2934
- Mon Aug 06, 2007 5:03 pm
- Forum: Electrical & Ignition Area
- Topic: Best Spark plugs to use, and gap :
- Replies: 8
- Views: 2934
Best Spark plugs to use, and gap :
I am running a Rover V8 3.5 with a compression ratio of 10:1, it has a full MSD ignition system (6T and billet dizzy) it also has a edelbrock 500cfm carb and an offenhauser 360 inlet, exhaust manifolds are fairly free flowing tube 4-2-1 system with a balance pipe about a 3rd of the way down the syst...
- Sun Aug 05, 2007 10:12 pm
- Forum: Electrical & Ignition Area
- Topic: MSD Ignition questions.
- Replies: 6
- Views: 2110
A bit of lengthy googling may have sorted it, will try tomorrow but it seems the brown or white wire on the GM ignitions is the Tach output, You check for a 1 to 5 volt signal when the car is running. I have a spare white wire so i will test this, funny as the MSD6A i had the white wire was left unc...
- Sun Aug 05, 2007 2:21 pm
- Forum: Electrical & Ignition Area
- Topic: MSD Ignition questions.
- Replies: 6
- Views: 2110
- Sun Aug 05, 2007 9:49 am
- Forum: Electrical & Ignition Area
- Topic: MSD Ignition questions.
- Replies: 6
- Views: 2110
MSD Ignition questions.
I am running a Rover V8 in my 1986 Opel Manta, I have just removed the standard dizzy and an MSD6A and am replacing the complete ignition system, the spec is MSD billet Distributor (PN8548) hooked up to a "GM Heavy duty ignition" essentially an MSD6T, this is in turn hooked up via the 4 pin plug to ...
- Tue Nov 21, 2006 9:19 pm
- Forum: General Chat Area
- Topic: Welcome To The New Forum.
- Replies: 35
- Views: 16946