Search found 2221 matches
- Mon Apr 23, 2007 8:23 pm
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: What efi fuel pump should i get?
- Replies: 6
- Views: 3262
I have heard the Walbro items are pretty good http://search.ebay.co.uk/fuel-pump-walbro_W0QQcatrefZC6QQfromZR10QQfsooZ1QQfsopZ1QQfsprZ0QQftrtZ1QQftrvZ1QQga10244Z10425QQsacatZQ2d1QQsaprchiZQQsaprcloZQQssPageNameZRC0021 Or you could fit 2 pumps to wrk in tandem to get the flow rate increased But you m...
- Mon Apr 23, 2007 8:04 pm
- Forum: Drivetrain & Transmission Area
- Topic: crankshaft spigot bearing
- Replies: 9
- Views: 5679
- Wed Apr 18, 2007 8:26 pm
- Forum: Cooling Area
- Topic: Water Pipes
- Replies: 5
- Views: 3869
- Wed Apr 18, 2007 8:21 pm
- Forum: Body & Strengthening
- Topic: harness's
- Replies: 14
- Views: 9857
Pretty well covered for SVA if they are E marked - that is all the testers looked for What ever you choose to do make sure you can adjust the belts without needing to remove seats etc, So many of the SABelts etc have the adjusters very near the mount bolts and in a car like the Gt40 that puts the ad...
- Thu Apr 12, 2007 7:12 pm
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: Noisey Fuel Pumps. (Help!!!)
- Replies: 12
- Views: 6264
Tank Pump Filter Carb should work Tank Filter Pump Carb could cause cavitation as pumps far prefer to push than suck On the 40 - long thin tanks in the side sills under braking and the fuel sloshed forward leaving the tank outlet dry and the pump (Facit Red) pumps air - this increases it's volume ab...
- Tue Apr 10, 2007 7:12 pm
- Forum: Electrical & Ignition Area
- Topic: Electrical stuff on a 3.9 efi
- Replies: 4
- Views: 1998
- Sun Apr 01, 2007 8:51 pm
- Forum: Engines Area
- Topic: FUEL CUT REV LIMITER - WILL IT DO ANY DAMAGE?
- Replies: 16
- Views: 7664
These flames are great but some caution With fuel burning in the Exhaust - is the flame burns back quickly it can blow the seam on the rear silencer. Happeed a few times on GT40 Kits but then mainly on the track and being over fed by Holly Carbs Big flame followed by bang and silencer opened up! Ian
- Sun Apr 01, 2007 2:51 pm
- Forum: Brakes & Suspension Area
- Topic: Bouncy bits.
- Replies: 23
- Views: 11888
GT40 Kits 300lb fronts and 400 rears Engine in the middle bot about 40 / 60 weight with more on the rear. Total weight about 1100kg So I would think your springs are way too soft. Now I happen to know where I can get abatch of these in a box if you want to do trial and error tests. They would need a...
- Sat Mar 24, 2007 10:47 am
- Forum: Electrical & Ignition Area
- Topic: 3.9 hotwire wiring
- Replies: 5
- Views: 2549
Purge control Valve -I haven't got it connected to anything on the Dax ad it runs Lambdas If you are on a 1990 engine chances are there were no lambdas present but they can be retro fitted - also then need t change the tune resistor to tell the ECU to expect lambda readings From memory the neutral s...
- Mon Mar 19, 2007 6:47 pm
- Forum: General Chat Area
- Topic: 4x4 tax
- Replies: 10
- Views: 4398
Rob I agree Put the tax on the petrol Make the MOT a tax style disc That way all the untaxed cars currently on the road pay their share If you do not have a current MOT it is visible to all It also will mean that the numerous cars appearing with Polish, Czech etc. plates with long term stayers will ...
- Thu Mar 15, 2007 8:24 pm
- Forum: Brakes & Suspension Area
- Topic: low down
- Replies: 2
- Views: 3387
Have a look at this thread
http://www.gt40s.com/forum/builders-for ... kva-2.html
Down the bottom of the page is a good write up on how o set your rack to avoid bump steer
Ok it's on a GT40 but the principals are all the same
Ian
http://www.gt40s.com/forum/builders-for ... kva-2.html
Down the bottom of the page is a good write up on how o set your rack to avoid bump steer
Ok it's on a GT40 but the principals are all the same
Ian
- Tue Feb 27, 2007 9:28 pm
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: Fuel pump selection for EFI project
- Replies: 10
- Views: 5566
I got mine from
James Aiken trading as Alloy racing Fabrications 07968 329 108
www.alloyracingfabricaons.co.uk
Price £45.00 plus £3.50 post and packing
Had to pay up front but it arrived within a week
Ian
James Aiken trading as Alloy racing Fabrications 07968 329 108
www.alloyracingfabricaons.co.uk
Price £45.00 plus £3.50 post and packing
Had to pay up front but it arrived within a week
Ian
- Mon Feb 26, 2007 6:54 pm
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: Fuel pump selection for EFI project
- Replies: 10
- Views: 5566
My initial thoughts was for the return from the fuel rail back into the swirl pot, and from the swirl pot back into the fuel tank. I don't know in reality how much fuel would flow from the swirl pot back into the fuel tank though. I agree returning from the fuel rail straight back into the fuel tan...
- Sat Feb 24, 2007 8:17 pm
- Forum: General Chat Area
- Topic: pipe bending
- Replies: 14
- Views: 5388
- Sat Feb 24, 2007 8:13 pm
- Forum: General Chat Area
- Topic: V8 forum stickers
- Replies: 36
- Views: 48736
Gents I likewise think this is a good idea BUT this stuff costs and someone needs to stock it and be prepared to do the mailing it out bit and collect the £££. We do stuff like this at the Gt40 Enthusiasts club and managed to make a couple of hundred quid in a year that to a membership of about 400 ...