also check your oil for swarf etc ..
when mine did that the oil pump had destroyed its self and then the first motion bearing seizes ....
Search found 689 matches
- Tue Sep 03, 2013 7:36 am
- Forum: Drivetrain & Transmission Area
- Topic: LT77 problem
- Replies: 5
- Views: 4337
- Sun Aug 18, 2013 11:05 am
- Forum: LPG Section
- Topic: No AFM
- Replies: 2
- Views: 3987
- Mon Aug 12, 2013 9:33 am
- Forum: LPG Section
- Topic: Where do I start ??
- Replies: 3
- Views: 4405
ive read your other post .... i assume your v8 is on carbs ? it very much depends on how handy your DIY skils are ... you can easily fit an Lpg setup for around £200 ... there are loads of parts on Ebay .... its a very simple setup on older engines .... im running a v8 on LPG and im running it on lp...
- Fri Aug 02, 2013 3:40 pm
- Forum: Electrical & Ignition Area
- Topic: coil
- Replies: 9
- Views: 2341
- Fri Aug 02, 2013 12:08 pm
- Forum: Electrical & Ignition Area
- Topic: coil
- Replies: 9
- Views: 2341
- Fri Aug 02, 2013 11:38 am
- Forum: Electrical & Ignition Area
- Topic: coil
- Replies: 9
- Views: 2341
- Thu Aug 01, 2013 6:28 pm
- Forum: Electrical & Ignition Area
- Topic: coil
- Replies: 9
- Views: 2341
- Thu Aug 01, 2013 12:57 pm
- Forum: Electrical & Ignition Area
- Topic: coil
- Replies: 9
- Views: 2341
coil
i ordered a coil RTC5628 .... and they sent me a 12v ballast coil ....
ive got a 35DLM8 Dizzy ..... is that going to be ok ?
ive got a 35DLM8 Dizzy ..... is that going to be ok ?
- Fri Jun 07, 2013 8:54 am
- Forum: LPG Section
- Topic: No AFM
- Replies: 2
- Views: 3987
No AFM
Spot the missing part ? ..... got fed up with AFM in the way so its in the boot ... just in case .. it runs all the time on LPG so theres no need to have it there and it runs so much better without it ... its all setup so a quick wizz with a screw driver and the AFM can be refitted ... just in case ...
- Fri Jun 07, 2013 8:41 am
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: Rover v8 injectors what replacements can be used
- Replies: 17
- Views: 18265
please think im being funny here ... but for the cost of getting the injectors serviced you could fit a single point LPG kit and only use petrol as a reserve like i do .... all the parts are avalible on ebay used or new ... you will not notice a drop in performance and its less than 70p a litre at t...
- Fri May 31, 2013 6:52 pm
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: converting to hotwire injection...._
- Replies: 9
- Views: 4256
- Fri May 31, 2013 6:52 pm
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: converting to hotwire injection...._
- Replies: 9
- Views: 4256
- Fri May 31, 2013 10:09 am
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: converting to hotwire injection...._
- Replies: 9
- Views: 4256
hi jono , is that your drift truck ? how about LPG before you laugh too much , you could get a flapper or hotwire manifold .. and a simple single point lpg setup , vaporiser / mixer ring etc and stick it straight onto the plenum no injectors , no elecrics , no ecu etc etc .... no airflow meter ... i...
- Mon Apr 29, 2013 7:00 pm
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: Exhaust manifold bolts
- Replies: 2
- Views: 1646
- Tue Apr 23, 2013 12:49 pm
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: Exhaust manifold bolts
- Replies: 2
- Views: 1646
Exhaust manifold bolts
Sorry if its been asked before ...
Whats the thread size of the exhaust manifold to head bolts please ?
Thankyou
Whats the thread size of the exhaust manifold to head bolts please ?
Thankyou