The V8 Owners Forum -

it is available in motor factors and it was £19

Just saying thanks for your help, got it running on the set up shown on here with the different amp mounted to the wing, running perfectly.

cheers guys

anybody know which wire goes where on the amp coming from the dizzy as the wires in my dizzy are both black i dont have an orange or purple one.

thanks

thanks very much will try that today

Anybody know if it works with that dizzy ? i want to try get one today if it does.
cheers

Hi,

i was just wondering does this amp modification work on this distributor ?
thnks

[/img][/url]

so if it is the amp, will the amp earlier on in this post the intermotor one work with my distributor, i have the new dizzy with the amp on the side.

cheers for all your help

i removed that as soon as you said before. is the volts ment to pulse and if so what controls that is it the bit the amp plugs to in the dizzy ?

Ok brilliant thanks for that. well i have been and bought another new coil. still nothing . someone told me that when i crank the engine the voltage on the - side of the coil should pulse drop off and then back up to the 12 v. which it is not doing it drops to 11.5v until i stop turning the key then...

hi, are the wires i have connected the correct ones ? to the + on the coil i have an ignition live, a live going to the live on the dizzy amp and a condensor, do i still need the condenser on this set up ? and just an earth and a - going to the dizzy amp on the - side of the coil. i have put a multi...

i dont run a live to the - on the coil though do i ? it just comes back off the amp as a + does it ? on the coil i have on the + side an ignition live, a condensor, not sure if i still need this on this coil and set up, and then the wire running to the + side of the amp. On the - side of the coil i ...

Hi, i have just put a new 35dlm8 on my rover 3.5 v8 sd1 engine to get rid of my opus one, and put a new lucas coil on it to and got rid of the resistor. i was guessing on the wiring as to what wires go to the coil + and - and which one is + and - on the amp, managed to get it running anyway and it w...