Hi All
Can anyone tell me what the Piston height & piston to deck clearance is on a TVR 4.0 HC engine is - thanks
Search found 17 matches
- Thu Dec 07, 2023 10:48 pm
- Forum: Engines Area
- Topic: TVR 4.0 HC Engine Query
- Replies: 0
- Views: 63708
- Fri Oct 28, 2022 4:12 pm
- Forum: Engines Area
- Topic: Engine cleaning
- Replies: 3
- Views: 2231
Engine cleaning
Hi I recently bought a 4.6 from a scrapper ,I wasn’t really bothered about the wear and tear as I bought it as a project to be fully refurbished - what I wasn’t prepared for was, the black sludge - absolutely minging . The issue I have is I’m not allowed to use paraffin, diesel petrol or any other f...
- Fri Oct 21, 2022 8:04 pm
- Forum: Engines Area
- Topic: Cams & Rockers ?
- Replies: 3
- Views: 2920
Cams & Rockers ?
Hi First of all I didn’t want to jump on someone else’s thread and deviate the response away from what other queries might be after. My question is fairly straightforward ( or not) I’m doing a lot of work to a RV8 and I was thinking about longevity V Performance and this is my query! Do I simply ins...
- Mon Sep 06, 2021 2:35 pm
- Forum: General Chat Area
- Topic: Rolling road/Landrover v8 3.9 Tuner needed in NE England
- Replies: 0
- Views: 61683
Rolling road/Landrover v8 3.9 Tuner needed in NE England
Hi I'm looking for a RR/
Tuner in NE England that can look inside a Lucas brain with a Tornado planted inside it.
Most the local ones don't have the Rover cables & software.
Any recommendations gratefully recieved
Cheers
Alan
Tuner in NE England that can look inside a Lucas brain with a Tornado planted inside it.
Most the local ones don't have the Rover cables & software.
Any recommendations gratefully recieved
Cheers
Alan
- Sat Sep 04, 2021 5:51 pm
- Forum: Rolling Roads And Dyno's
- Topic: Rolling road/landrover 3.9 tuner required in NE
- Replies: 0
- Views: 67552
Rolling road/landrover 3.9 tuner required in NE
Hi I'm looking for a RR/
Tuner in NE England that can look inside a Lucas brain with a Tornado planted inside it.
Most the local ones don't have the Rover cables & software.
Any recommendations gratefully recieved
Cheers
Alan
Tuner in NE England that can look inside a Lucas brain with a Tornado planted inside it.
Most the local ones don't have the Rover cables & software.
Any recommendations gratefully recieved
Cheers
Alan
- Sun Aug 29, 2021 8:14 am
- Forum: Electrical & Ignition Area
- Topic: MOST FOUL RESISTANT PLUGS
- Replies: 10
- Views: 5914
Re: MOST FOUL RESISTANT PLUGS
Try taking the MAF off and spraying the thermocouples with acetone or some other contact cleaner, you could also give the coolant temperature sensor a once over
- Sat Aug 28, 2021 10:45 am
- Forum: Electrical & Ignition Area
- Topic: Setting hotwire CO
- Replies: 2
- Views: 1887
Setting hotwire CO
Hi I killed off the original AM5 Mass Air Flow Meter and have replaced it with a Britpart one. Prior to fitting I checked the voltage & found it to be 1.89vdc , I retrimmed this to 1.8 vdc(for a catalysed engine) as per the write up - went for a spin to warm everything up and then measured the CO , ...
- Sun Aug 19, 2018 5:28 pm
- Forum: Electrical & Ignition Area
- Topic: 14CUX ECU help
- Replies: 14
- Views: 8541
Re: 14CUX ECU help
Yes, I sent the ECU away to Mark Adams, unfortunately the tests proved there was nothing wrong with the ECU-which was bad news, I did however use the opportunity to upgrade the chip from an Optimax to a Tornado, so then it was back to multi meter fault testing. I finally traced a cable fault to the ...
- Wed Dec 27, 2017 2:46 pm
- Forum: Body & Strengthening
- Topic: Epoxy Primer + Chassis Black
- Replies: 6
- Views: 6904
- Fri Dec 22, 2017 6:22 pm
- Forum: Electrical & Ignition Area
- Topic: Fuel pump relay
- Replies: 5
- Views: 3046
- Tue Nov 28, 2017 11:14 pm
- Forum: Electrical & Ignition Area
- Topic: 14CUX ECU help
- Replies: 14
- Views: 8541
This is on a '99 Morgan 3.9, with the same type of ECU fitted to the TVRs of the era Ok a brief history About 6 months ago I started having intermittent problems with the fuel pump not starting,there is nothing wrong with the pump The green immobiliser box is communicating to the ECU OK The spider u...
- Mon Nov 27, 2017 10:11 pm
- Forum: Electrical & Ignition Area
- Topic: 14CUX ECU help
- Replies: 14
- Views: 8541
14CUX ECU help
I have a problem with my Morgan ECU, can anyone on this forum recommend a good reasonably priced company that can test & repair
Cheers
Cheers
- Fri Sep 08, 2017 6:04 pm
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: Rover 3.9 hot wire CO
- Replies: 4
- Views: 3076
- Thu Sep 07, 2017 1:21 pm
- Forum: Exhaust, Cylinder Heads, Fuel And Intake Area
- Topic: Rover 3.9 hot wire CO
- Replies: 4
- Views: 3076
Rover 3.9 hot wire CO
HI
can anyone advise what the CO reading should be for a 3.9 Hotwire engine
cheers[/b]
can anyone advise what the CO reading should be for a 3.9 Hotwire engine
cheers[/b]
- Mon Mar 07, 2016 2:48 pm
- Forum: Engines Area
- Topic: Range Rover Valve Stem Seals Query
- Replies: 7
- Views: 4757