Search found 356 matches

by Jono FD3
Tue Nov 07, 2017 10:27 pm
Forum: Electrical & Ignition Area
Topic: ECU pin out diagram for xjr
Replies: 1
Views: 1192

ECU pin out diagram for xjr

Hi guys.... I'm try in to track down a pin out diagram for a 2000 Jaguar XJR engine ECU.
Basically pulling the engine and running stand alone ecu, but knowing what wire does what at the ECU plug will save a lot of time hooking up the new ECU!

Cheers
Jono
by Jono FD3
Sat Feb 07, 2015 10:41 pm
Forum: Engines Area
Topic: chevy 350 rebuild..... lets talk parts!
Replies: 15
Views: 6837

Excellent. Mike, that's what I wanted to hear, I'm going to be using the pistons and rods that are there as they are in good nick and are forged aswell all be it stock chevy itsms. And a rev kit is something.I'm looking at getting my hands on! Any sujestions on ignition system, so I can keep an eye ...
by Jono FD3
Sat Feb 07, 2015 6:17 pm
Forum: Engines Area
Topic: chevy 350 rebuild..... lets talk parts!
Replies: 15
Views: 6837

Staying n/a with this as I haven't got blower money or a tank big enough to feed it!! Want it to be fairly unstressed as I want it reliable for my drifting! The rover lump has shut a lot of people up as it just keeps on going and starts every time, but doesn't push enough power for the big track! Al...
by Jono FD3
Sat Feb 07, 2015 1:21 pm
Forum: Engines Area
Topic: chevy 350 rebuild..... lets talk parts!
Replies: 15
Views: 6837

chevy 350 rebuild..... lets talk parts!

Right guys, I know a few of you are probably thinking "oh f**k sake just get on with the build!" so apologies! Basically I've stripped the 4bolt chevy that was supposed to have been a fresh build set upfor a blower... But this was far from the truth!!! Opened the engine up and found high compression...
by Jono FD3
Tue Jun 03, 2014 10:54 pm
Forum: Engines Area
Topic: sbc internal/external. balance flywheel???
Replies: 7
Views: 3467

Cheers guys, is there any way of telling by looking at the crank?? Reason being, the block didn't have any pullies or flywheel on when we got it originally!!!

Jono
by Jono FD3
Tue May 20, 2014 9:59 pm
Forum: Engines Area
Topic: sbc internal/external. balance flywheel???
Replies: 7
Views: 3467

sbc internal/external. balance flywheel???

What's the difference people?? I'm needing a new one, but not sure what's needed!! It's for an old cast block with 2 piece Main seal!

Cheers jono
by Jono FD3
Sun Mar 30, 2014 9:13 am
Forum: Engines Area
Topic: Chevy 5/8 7/16 rockers.... what's the difference??
Replies: 4
Views: 2418

Ok so it's the thread size then yea??? Basically I've found a set of 7/16 full roller rockers up for sale and was wanting to see if they would fit my heads or if I would need different studs in the head??

Jono
by Jono FD3
Sat Mar 29, 2014 10:40 pm
Forum: Engines Area
Topic: Chevy 5/8 7/16 rockers.... what's the difference??
Replies: 4
Views: 2418

Ok so it's the thread size then yea??? Basically I've found a set of 7/16 full roller rockers up for sale and was wanting to see if they would fit my heads or if I would need different studs in the head??

Jono
by Jono FD3
Sat Mar 29, 2014 7:40 pm
Forum: Engines Area
Topic: Chevy 5/8 7/16 rockers.... what's the difference??
Replies: 4
Views: 2418

Chevy 5/8 7/16 rockers.... what's the difference??

Like the title says guys what is the difference between the 5/8 and the 7/16 rockers?? Is it just the collars on the Polly lockers or is it the threads on the rocker studs??? Just want to find out so I don't get the wrong bits for my cast camel hump heads!!

Cheers
Jono
by Jono FD3
Thu Mar 20, 2014 11:28 am
Forum: Engines Area
Topic: opinions on this comp cams grind
Replies: 7
Views: 4108

Hi guys, sorry to be pestering all the time! I've missed out on the cam above as the guy wanted $200 to ship it to the UK which I thought was taking the P a little! But I've just bought some parts of a chevy man and he has got a full retro fit roller cam with uprated push rods, and roller lifters, b...
by Jono FD3
Sun Mar 16, 2014 9:16 am
Forum: Engines Area
Topic: cam gear set.... what's your opinions??
Replies: 7
Views: 2829

cam gear set.... what's your opinions??

Hi guys just wandering what your thoughts are on the cam gear sets for the 350 chevy instead of the usual timing chain???
They seem to be Perry cheep and would eliminate any chain slack!

Jono
by Jono FD3
Fri Mar 14, 2014 10:34 am
Forum: Engines Area
Topic: Chevy Flat Tappet - roller lifter conversion??!!
Replies: 1
Views: 1557

Chevy Flat Tappet - roller lifter conversion??!!

Hi guys, I was searching the net the other night and came across someone who had made there own retro fit lifters from the later style chevy lump components. Now from what I can see he has fitted the retaining spider in to the block by drilling and tapping the relevant fittings in to his pre roller ...
by Jono FD3
Wed Mar 12, 2014 10:00 pm
Forum: Engines Area
Topic: cam gear set.... what's your opinions??
Replies: 0
Views: 9552

cam gear set.... what's your opinions??

Hi guys just wandering what your thoughts are on the cam gear sets for the 350 chevy instead of the usual timing chain???
They seem to be Perry cheep and would eliminate any chain slack!

Jono
by Jono FD3
Tue Mar 11, 2014 10:15 pm
Forum: Engines Area
Topic: opinions on this comp cams grind
Replies: 7
Views: 4108

My bad, it was the gearbox that went not the bottom end!! The engine is going in to a rift truck and is only used on track and weighs in at about 1400kg. Going to be running custom tubular headers, holley 600com double plumper, and not sure on the inlet as yet as I'm still to get one!! But I should ...
by Jono FD3
Sat Mar 08, 2014 9:17 pm
Forum: Engines Area
Topic: opinions on this comp cams grind
Replies: 7
Views: 4108

That's what I like to heart Mike.... The lad is selling bits to recoup some money as the bottom end let go or something.... So he is selling an electric waterpump and a cam with lifters that has done about 15hrs, so basically they are all run in but no real use!

Go to advanced search