The V8 Owners Forum -

Hi Andrew; I replaced my Flapper system with a Hotwire system last winter. The speed sensor (speedo driven) output is fed into pin 6 of the ECU. Have looked at the circuit diagram and the 6.8k resistor feeds a 'Speed trip module' which is something different to the road speed sensor. When I made up...

Good day all. I have been busy sorting all the little jobs. relocating the brake booster master cylinder & clutch master cylinder. Also had the final machining on the rear tailshaft. How can i post pics now Photobucket really did the job on our shareing.

G'day all. I spent a bit of time under the kombi & trimmed a bit more around the filter housing. After a bit of careful cutting I should be able to use the set as it is.

Hi Garry all the oil cooler kits I have looked at depend on the oil filter sitting on them. we don't have as many choices in OZ as you blokes have over there. the rover is considered a poor choice by a lot of v8 blokes.

G'day all. I know this is an old thread but I have a question for ChrisJC I want to blank off my oil filter on my Serp 3.9 in my VW bus midengine arrangement Can I ask if you have pics of the mod you did on your timing case please. this is the dummy engine 3.5 the filter comes out at about the same ...

G'day Dave. What can I say. the info was very useful. Thanks for your time. I often sit back after reading these post & think what a great community the car people share. To be able to communicate what I need to so many diverse people around the world. To everyone out there thanks for being Car hobb...

G'day all. Well what an easy task with only 1 diagram instead of 2 tool work off. Thanks to David. Ian thanks for the info on purge I found it. unfortunately we have to use what ever the engine came with to get reg. saving grace is no cats from factory. Keep watching if you see where I may be headed...

Another part I can't find is the purge valve does anyone have a pic of what it looks like & where it should be on the 3.9 motor. google shows a lot of different items confusing as they all claim to be purge valve.
thanks for any help
ernie

Good afternoon Dave Can you tell me where & what to look for the transmission resistor I have tried to find a pic of 1 on google

Thanks Ernie

G'day DaveEFI. thanks mate this will be a great help. now I have a drawing that makes sense. the Haynes has 2 that seem to cross over. All the best for the New year.

Happy New Year all. From Australia. Now to the point can anyone help me with a very basic engine wiring diagram for engine alternator & senders to run a cux14 3.9. I have a good manual but it has 2 different sets of wires some on 1 page pre 95 then matching others on post 95. Confusing me so please ...

G'day all. I'm building a mid engine roverv8 powered VW bus. The engine is out of a 95 disco 3.9 serpentine with no cats. I would really appreciate a wiring diagram to suit the engine alone no accessories air steer cruise control. purely enough to run the engine. Thanks for any information forth com...

G'day all. I have been catching up on little jobs now the home reno's are finished for a while. I have modified the mounting for the transfercase to use the original Nissan chassis to case brackets. The intermediate shaft has been changed from the CV type 1st set up to a normal 2 joint shaft approx ...

DOH

G'day all. Ian thanks for the pics an idea well worth looking at VW supplied the perfect item in the factory heater fan for the late bay bus I have 2 of these so in they go http://i1273.photobucket.com/albums/y406/roverv8kombi/38186e30-19ae-4593-842a-ee6df341f562_zpsahxezvci.png Front diff crossmemb...