The V8 Owners Forum -

I have some good start-up Msq's if you need one. Just PM your e-mail or go to my web site:- www.essexmegasquirt.co.uk and go to contacts.



HTH. Jeff.

Try opening the plug gaps some more.. EDIS will run with 1mm with no problems, in fact Ford recommend 0.75mm to 1.00mm

HTH

Jeff

Coops and SS, you are both running MS2 not MS1 that's why the TS is different.

I've had a look for a 4.6 spark map and I don't seem to have 1. 5.2 eals, 4.2 RV8 and a 4.5 eals but no 4.6 RV8.

here you go.



and..

Cheers Jeff. are there any ignition maps on MS for the 4.6 that i can look at to see if im getting my map the right way?? I will have a dig round the hard drive but with your super charger there is a calculation for the amount of boost PSI to the amount of MAP/ spark advance, something like "for ea...

Coops try these settings. These are what are used in my Rangie and have sorted out the heat soak issues. It's a N/A injected 3.9 RV8 but if you put the motor in a muddy hole ticking over for any length of time the heat under the bonnet is quite high with headman headers and these settings have meant...

Just a little up date.. The chaps and I have been a little busy with the disc cutter, bender and mig. It's a two seater now as the X brace with the 3rd winch mounted on it takes up the rear seat room. It's still my daily driver.. :shock: http://i220.photobucket.com/albums/dd52/stripyone/IMG_1392.jpg...

Hmmmmmmm! Thanks Sidecar. Looks like Billy Bodger has been in there. 1) plastic cover broken 2) chopper touching pick-up eye. What else will I find............ Anyone know or recommend somewhere to get spares for this? I may be needing advance springs etc...........ho-hum! Thanks again. Martin Mart...

Just go for Megasquirt.. PM me or daxtojero

I must admit that I'm not a big fan of bimmers but that is a fantastic looking car with a lot of hard work ploughed in to it, Very impressive well done.

Jeff

Here's mine Tone, but it's a 3.9 I do have a 4.6 somewhere but it's not that different. http://i229.photobucket.com/albums/ee286/bobtail84/Bigadvancemap.jpg This one is JED 5.2 http://i229.photobucket.com/albums/ee286/bobtail84/52_JED_Spark_MAP.jpg and this might be P.R's but I'm not sure http://i22...

marcjagman wrote:Any joy on the LPG bits yet bobtail?

I've found the vaporiser but I'm still looking for the other bits. Typical, I've been tripping over all the bits you need for ages but try and find them when you want them...

marcjagman wrote: Thanks very much, that would be great. Using Stromberg CD1.75 carbs.

I will look tomorrow and take some photos.

Jeff

I may still have a vaporiser, rings "Y" piece and other bits for twin strombergs in the shed. I'll have a look if you like.

Jeff