Racing Rover P6
Moderator: phpBB2 - Administrators
Racing Rover P6
Does anyone have any information on this car? In was around in 2008.
The engine is a 5 litre producing 485 HP. The gearbox is made by Quaife.
It is my understanding that the cylinder heads are by Oldsmobile.
It looks seriously quick, and I bet it sounds the business too.
Ron.
The engine is a 5 litre producing 485 HP. The gearbox is made by Quaife.
It is my understanding that the cylinder heads are by Oldsmobile.
It looks seriously quick, and I bet it sounds the business too.
Ron.
4.6 Rover 3500 P6B
- Ian Anderson
- Forum Contributor
- Posts: 2396
- Joined: Sun Nov 19, 2006 9:46 pm
- Location: Edinburgh
Could not see them at work but home yes
We've got so much blocked in the office like photobucket - I was not surprised I could not see the pics
Good looking car - as you want to track it down why not try the website emblazoned on it!
Ian
We've got so much blocked in the office like photobucket - I was not surprised I could not see the pics
Good looking car - as you want to track it down why not try the website emblazoned on it!
Ian
Owner of an "On the Road" GT40 Replica by DAX powered by 3.9Hotwre Efi, worked over by DJ Motors. EFi Working but still does some kangaroo at low revs (Damn the speed limits) In to paint shop 18/03/08.
- Ian Anderson
- Forum Contributor
- Posts: 2396
- Joined: Sun Nov 19, 2006 9:46 pm
- Location: Edinburgh
- Ian Anderson
- Forum Contributor
- Posts: 2396
- Joined: Sun Nov 19, 2006 9:46 pm
- Location: Edinburgh
- Ian Anderson
- Forum Contributor
- Posts: 2396
- Joined: Sun Nov 19, 2006 9:46 pm
- Location: Edinburgh
-
- Top Dog
- Posts: 2334
- Joined: Sat Aug 18, 2007 5:09 pm
- Location: Sidcup, Kent, UK
Great site and videos.
I thought initialy that it was based on the original Traco built engines built for rover but that was 4.3 litres with 365BHP based on a 215/3.5 liter block with a Buick 300 3.4" crank
There is a link to Wildcat so I presume that a certain Mr Richardson had something to do with the engine build
I would guess that it may have Buick 300 heads and possibly an Olds block,
The Traco engines used a lot of Oldmobile parts but the port sizes on the standard Olds heads as cast are fairly restictive but have the advantage of the valves being closer to the centreline of the bores.
There were however some special castings of the Buick heads and possibly the Olds where they had the large port size of the Buick 300 alloy heads but the smaller combustion chamber of the 215/3.5 litre engine which I believe were done for Mickey Thompson, Dan Jones (USA) recently picked up a pair of these heads.
Love the car and would love to see it running if it's still being raced.
Kevin.
I thought initialy that it was based on the original Traco built engines built for rover but that was 4.3 litres with 365BHP based on a 215/3.5 liter block with a Buick 300 3.4" crank
There is a link to Wildcat so I presume that a certain Mr Richardson had something to do with the engine build
I would guess that it may have Buick 300 heads and possibly an Olds block,
The Traco engines used a lot of Oldmobile parts but the port sizes on the standard Olds heads as cast are fairly restictive but have the advantage of the valves being closer to the centreline of the bores.
There were however some special castings of the Buick heads and possibly the Olds where they had the large port size of the Buick 300 alloy heads but the smaller combustion chamber of the 215/3.5 litre engine which I believe were done for Mickey Thompson, Dan Jones (USA) recently picked up a pair of these heads.
Love the car and would love to see it running if it's still being raced.
Kevin.
Got them now
What a lovely looking machine that is !!
What a lovely looking machine that is !!
Perry Stephenson
MGB GT + Rover V8
9.62 @ 137.37mph
Now looking for 8 seconds with a SBC engine
-
- Helpful or Confused
- Posts: 67
- Joined: Sat Apr 12, 2008 9:59 pm