Bell housing offset dowel pins

General Chat About Drivetrain & Transmission.

Moderator: phpBB2 - Administrators

Post Reply
leigh72
Newbie
Newbie
Posts: 1
Joined: Fri Dec 28, 2012 5:26 pm

Bell housing offset dowel pins

Post by leigh72 »

Hi All,

Looking for some advice on where I can get some offset dowel pins to suit a 3.9 rover v8. Currently upgrading the gearbox to a tremec/also using a roadcraft bell housing. Just about to dial the bell housing in and anticipating that I may need some offset dowel pins. Have searched for some for the rover but didn’t turn anything up.
Any ideas on where to source some would be great.
Thanks in advance


Top
SuperV8
Guru
Guru
Posts: 947
Joined: Tue Jul 07, 2009 11:25 pm
Location: West midlands

Re: Bell housing offset dowel pins

Post by SuperV8 »

What are the diameter of the rover ones?
Dax Rush 4.6 supercharged V8 MSII
Top
DEVONMAN
Top Dog
Top Dog
Posts: 1440
Joined: Sat Dec 13, 2008 2:46 pm
Location: Croydon UK

Re: Bell housing offset dowel pins

Post by DEVONMAN »

1/2"
1950 A40 Devon Hotrod with 5.0 twin turbo RV8.
EDIS8 wasted spark, Holley Injection.
Been as far as the Moon and back in 57 years of driving. Same Car, 5 engine upgrades !!!


Image
Top
SuperV8
Guru
Guru
Posts: 947
Joined: Tue Jul 07, 2009 11:25 pm
Location: West midlands

Re: Bell housing offset dowel pins

Post by SuperV8 »

Search "1/2 offset dowel pin"

https://www.summitracing.com/search/par ... n_0-021-in
Dax Rush 4.6 supercharged V8 MSII
Top
Post Reply

Return to “Drivetrain & Transmission Area”