dry sump

toughy V8 · Post by **toughy V8** » Tue Nov 28, 2006 8:32 pm

ive just smashed the sump on my bmw because its a modified one thats been designed to fit over the cross member which means its very low at the front and now ive smashed it beyond repair, where can i get a dry sump system and are they expensive

kev_the_mole · Post by **kev_the_mole** » Tue Nov 28, 2006 9:22 pm

Toughy,

try www.paceproducts.co.uk. They don't do a specific BMW kit (except for a Mini!) but you can buy all the bits except for the sump from them. As for cost a Vauxhall 16V kit cost about £700.

Cheers,

Ian

adamnreeves · Post by **adamnreeves** » Tue Nov 28, 2006 9:44 pm

Ouch, hope the engine is okay mate.

Richard · Post by **Richard** » Wed Nov 29, 2006 12:15 am

JE Engineering have them in their lists of parts, so might be worth a call: 024 76 305018 or http://www.jeengineering.co.uk

CJV8 · Post by **CJV8** » Thu Nov 30, 2006 8:08 am

Is there a difference between JE Engineering and John Eales?
I know John Eales makes a dry sump for the BMW V8's used in the Morgan Aero 8.
Give him a ring on 01455 202 909.

Boosted LS1 · Post by **Boosted LS1** » Fri Dec 01, 2006 1:19 pm

CJV8 wrote:Is there a difference between JE Engineering and John Eales?
I know John Eales makes a dry sump for the BMW V8's used in the Morgan Aero 8.
Give him a ring on 01455 202 909.

Yep, John Eales used to be a co-director at JE Engineering but they parted company many years ago.

Boosted.