Fozwanger wrote:Porsche boxter trans are cheap and plentiful
And should easily handle a stock 3.5 rover engine output.
If you are looking at UN1 it certainly is not a transverse system unless you are turning it into 4wd and using two more diffs.
You can get Audi units that are said to handle more torque than a UN1 which in standard form cries enough at about 400hp behind a 5litre Ford v8
I also believe a VW oircooled transaxle would probably suffice behind a mild Rover
Or have a look over at GT40s.com as they have a complete section on transaxles!
Ian