OMVL single port

Any posts regarding LPG to be posted here ONLY please.

Moderator: phpBB2 - Administrators

Post Reply
roverv8
Newbie
Newbie
Posts: 4
Joined: Fri Jan 18, 2013 11:38 pm

OMVL single port

Post by roverv8 »

OMVL single port set up on my 90 v8 all works with out any problems only thing is the safety relay got removed when i changed over engines, does any one know how to wire it up? like i said its just a safty relay four wires and a bridge on it, any help be great,thanks mark.



roverv8
Newbie
Newbie
Posts: 4
Joined: Fri Jan 18, 2013 11:38 pm

Post by roverv8 »

anyone? :shock:

roverv8
Newbie
Newbie
Posts: 4
Joined: Fri Jan 18, 2013 11:38 pm

Post by roverv8 »

:roll:

texpis
Helpful or Confused
Helpful or Confused
Posts: 117
Joined: Fri Dec 15, 2006 8:07 pm

Post by texpis »

If this is the relay you mean http://www.autogasshop.co.uk/safety-tim ... -382-p.asp.
Positive and earth are self explaining the 2v are the outputs to your solonoids and the right hand symbol bit like pye is signal from the coil. Usually this is a wire wrapped around the coil to dizzy ht lead.
The relay only stays energised while there is a signal from the ht lead to the relay.

Hope this makes sense mick

Post Reply

Return to “LPG Section”