My dyno results (2005)

For V8 Forum Members only, Please list rolling road & dyno posts in here please

Moderator: phpBB2 - Administrators

Post Reply
User avatar
Blown v8
Gold Member
Gold Member
Posts: 369
Joined: Sun May 25, 2008 2:20 pm
Location: Kent

My dyno results (2005)

Post by Blown v8 »

Image
Image
With only 5.5lbs of boost !



User avatar
Blown v8
Gold Member
Gold Member
Posts: 369
Joined: Sun May 25, 2008 2:20 pm
Location: Kent

Post by Blown v8 »

The block was a new 4.6 cross bolted block.top hat liners,a one off billet steel crank,made by Farndons(who offset ground the TVR 5.0 cranks)cross drilled and knife edged,giving me 5.0litres ! Chevy steel H beam rods,forged pistons (8:0-1) camshaft made to my own specs (114* lobe centres)Kenne belle roller rockers,steel racing shafts,steel pillars and outriggers. SDi heads,standard valves,highly ported,new seats and guides,combustion chamber enlarged to fit the 4.6 bore. Elderbrock manifold welded to fit 4:71 GMC blower running 1-1,Holley 650dp,MSD ignition and boost retard


I've had supercharged rovers for over 20 years,3.5s,4.6 and now the 5.0L
Stay tuned for updates !

mgbv8
Forum Contributor
Forum Contributor
Posts: 5326
Joined: Sat Nov 18, 2006 7:57 pm

Post by mgbv8 »

Looks like the 5 litres will produce interesting results eh ? :)

Perry Stephenson

MGB GT + Rover V8

9.62 @ 137.37mph

Now looking for 8 seconds with a SBC engine

http://www.youtube.com/watch?v=nVscbPHgue0&list=UUqIlXfSAoiZ--GyG4tfRrjw



https://www.youtube.com/watch?v=eg3avnsNKrc&index=2&list=FLqIlXfSAoiZ--GyG4tfRrjw

User avatar
Blown v8
Gold Member
Gold Member
Posts: 369
Joined: Sun May 25, 2008 2:20 pm
Location: Kent

Post by Blown v8 »

I have now got a set of 300 heads I've started work on !
Blower now is 10% overdriven,and am looking to upgrade to a 6:71

Post Reply

Return to “Rolling Roads And Dyno's”