thin sandwich carb insulating plate? Where from?

General Chat About Exhaust, Cylinder Heads, Fuel Systems And Intake

Moderator: phpBB2 - Administrators

Post Reply
moppit
Helpful or Confused
Helpful or Confused
Posts: 72
Joined: Tue Jun 03, 2014 12:48 pm
Location: Winchester, UK

thin sandwich carb insulating plate? Where from?

Post by moppit »

Hi Folks,

Converting my RV8 to the edelbrock manifold (previously offy) and under bonnet space is limited. I've got a thick insulating plate but wondered where can I get the thin sandwich multi-layer type from? Any thoughts on their effectiveness?

I'm sure I say these on fleabay somewhere but cannot find em now...

Do you guys normally seal either side of the gasket with silicone?

Any help much appreciated, cheers



Stu E
Helpful or Confused
Helpful or Confused
Posts: 86
Joined: Mon Jun 11, 2007 7:49 pm

Post by Stu E »

Have you tried Real Steel. I got the multi layer one from them, it was several years ago.

moppit
Helpful or Confused
Helpful or Confused
Posts: 72
Joined: Tue Jun 03, 2014 12:48 pm
Location: Winchester, UK

Post by moppit »

Bingo! Thanks, got one from Real Steel..

Post Reply

Return to “Exhaust, Cylinder Heads, Fuel And Intake Area”