RV8 into Porsche 944 progress.

General Chat About Engine Build

Moderator: phpBB2 - Administrators

Post Reply
r1_pete
Newbie
Newbie
Posts: 14
Joined: Wed Jul 20, 2016 6:55 pm
Location: Sheffield

RV8 into Porsche 944 progress.

Post by r1_pete »

I havent posted for a while, so thought I would put a couple of pics up of progress, if the pics work....

Heres the RV8 linked to the 944 torque tube, there is a 944 flywheel and clutch in there all centred and working

https://www.locostbuilders.co.uk/galler ... he%203.JPG

After a lot of head scratching Ive decided to go with a Modified Thor top end, using twin bodies, after a bit of cutting and welding I have come up with this,

https://www.locostbuilders.co.uk/galler ... es%203.JPG

Its worked out about 40mm lower than hotwire or gems, and I have a 68mm throttle body left over and the flange which I could weld onto a hotwire or gems hood, for a bit more airflow, if I do I'll pop it in the for sale section.


1967 4.2 E Type with custom EFI
1988 Porsche 944 collecting V8 conversion bits

Post Reply

Return to “Engines Area”