RV8/TVR 4.0 Purge Control Valve advise please...

General Chat About Exhaust, Cylinder Heads, Fuel Systems And Intake

Moderator: phpBB2 - Administrators

Post Reply
v8250
Getting There
Getting There
Posts: 240
Joined: Mon Jan 19, 2009 1:07 pm
Location: West Berkshire

RV8/TVR 4.0 Purge Control Valve advise please...

Post by v8250 »

The MG V8 conversion continues...and I need some advise on the purge control valve i.e., is it really necessary on this engine?

If not, what signal will the 14CUX expect with no PCV installed...? All advise/recommendations greatly received. Thank you, v8250

Update: okay, the PCV is only there to manage unspent hydro carbons with the ECU only sending the signal to the PCV to open :. if I install no PCV/carbon canister system/no connection to the inlet I can install a vented fuel filler cap to provide the same vent function to any excess fuel vapours...

...have I missed anything...?



Post Reply

Return to “Exhaust, Cylinder Heads, Fuel And Intake Area”