Rover v8 machining Lancashire
Posted: Sun Aug 21, 2016 7:06 pm
I've stripped my rv8 3.5 down and now want to carry out some machining work, however my usual machine shop can't inline hone the mains, so any specialists in the lancashire area who can carry this out?
Work wanted:
Rebore +20 thou & hone
Replace oil & water gallery plugs + thoroughly clean
Conrod check and resize (arp bolts fitted) + fit pistons
Fit new cam brgs and hone
Align hone main brgs ( arp studs fitted)
Regrind / polish crank as reqd
Cheers
Chris
Work wanted:
Rebore +20 thou & hone
Replace oil & water gallery plugs + thoroughly clean
Conrod check and resize (arp bolts fitted) + fit pistons
Fit new cam brgs and hone
Align hone main brgs ( arp studs fitted)
Regrind / polish crank as reqd
Cheers
Chris